EU Toy Safety Regulation
What Changes, and What to Ask For Now
The EU has replaced its twenty-year-old toy directive. The new rules do not bite yet, but the moulds and materials you approve this year are what you will be defending in 2030 — so the useful question is not "when does it apply", it is "what should be in my next order's documentation".
Short answer
Today, toys placed on the EU market are governed by the Toy Safety Directive 2009/48/EC, evidenced by CE marking, EN 71 test reports and a written EU declaration of conformity. Nothing about that changed in 2026.
From 2030, it is replaced by Regulation (EU) 2025/2509 — a regulation rather than a directive, so it applies identically in every member state, with a digital product passport and a wider set of restricted substances.
The date is 1 August 2030, when Directive 2009/48/EC is repealed after a 54-month transition. Summary pages that give April 2030 are wrong — the Official Journal text of 2025/2509 is the reference, and it is short enough to read.
What Actually Applies to Your Container Today
Buyers frequently arrive at this topic after reading a headline and assume the new rules are already in force. They are not. For a 2026 shipment, the compliance file is still built on the directive:
- CE marking on the toy or its packaging, applied by the manufacturer — not a certificate issued by a laboratory.
- EN 71 test reports for the specific model: mechanical and physical properties (EN 71-1), flammability (EN 71-2), migration of elements (EN 71-3), plus the relevant parts for chemical content.
- EU declaration of conformity, issued by the manufacturer or the importer, listing the directives and standards applied.
- Technical documentation, retained and available to market surveillance authorities on request.
- Warnings and instructions in the language of the member state of sale, with the age grading and the CE mark in the prescribed form.
If a supplier cannot produce the declaration of conformity and a model-specific test report, no amount of chemistry discussion matters — the file is not complete under rules that have applied since 2011.
Directive vs Regulation: Side by Side
| Dimension | 2009/48/EC (today) | 2025/2509 (from 2030) |
|---|---|---|
| Legal form | Directive — transposed into national law | Regulation — one text, all member states |
| Chemical limits | Restricted substance list, amended over time | Broader scope, targeting endocrine disruptors, PFAS, bisphenols and fragrance allergens |
| Risk assessment | Chemical, physical, electrical, hygiene, radioactivity | Same, plus digital risks for connected toys — data, privacy, cybersecurity |
| Documentation | Paper declaration of conformity in the technical file | Digital product passport, machine-readable, accessible by code |
| Enforcement | National market surveillance | Stronger surveillance powers and explicit obligations for online marketplaces |
The right-hand column summarises the direction of travel reported by conformity bodies and the industry association. The binding wording — including exact substance limits — is the Official Journal text, not this table.
The Change That Affects an Order Sheet Most: Materials
Of everything in the regulation, the substance restrictions are the part that can invalidate a mould. A digital passport is data work; a PFAS or bisphenol restriction can mean a new material, a new tool, or a discontinued model.
The practical consequence for a buyer is that "does it pass EN 71-3?" is no longer a sufficient question. Element migration is one chapter. The categories that the new regime targets — per- and polyfluoroalkyl substances used for water and stain resistance, bisphenols in polycarbonate shells, endocrine disruptors, fragrance allergens in toys intended for the mouth — sit outside what a routine heavy-metals test screens for.
What you can ask for now, without waiting for the harmonised standards: a material declaration per component from the factory, naming the polymer grade and confirming absence of PFAS and bisphenol A in any part that a child can mouth. For water guns and outdoor toys this is not academic — water-resistant coatings and translucent polycarbonate bodies are exactly where these substances historically appear.
EN 71-1:2026, and Why Your Report Version Matters
Separately from the regulation, the mechanical and physical properties standard was revised: EN 71-1:2026 was published in early 2026, a full revision of EN 71-1:2014+A1:2018. Testing bodies reported major rework of the ride-on toy section — balance bikes, handlebar impact, brake performance, scooter steering tube strength — and new requirements for food-imitating toys.
Important detail that catches buyers out: a published standard and a legally cited standard are two different things. The most recent harmonised-standards update, Commission Implementing Decision (EU) 2026/2032 of 14 September 2026, added EN 71-15:2025 and EN 71-16:2025 and replaced EN 71-4:2020 with EN 71-4:2020+A1:2025. It did not cite EN 71-1:2026. So the 2026 mechanical standard is still not harmonised, and a report referencing it does not by itself demonstrate compliance today. EN 71-1:2014+A1:2018 remains the cited reference, which is why most factories are still testing to it.
So when you receive a test report, read the standard number and year on it. A report quoting a version older than your competitor's is not necessarily non-compliant — but a report that does not state a version at all usually means nobody checked.
A Buyer's Checklist for the Next Order
| Ask for | Why now, not in 2029 |
|---|---|
| Test report with the standard version printed on it | Tells you whether the file will survive re-testing under EN 71-1:2026 |
| Material declaration per component | PFAS and bisphenol questions are answered at material selection, not at inspection |
| EU declaration of conformity | Still the current legal requirement, and the first document a customs or authority query asks for |
| Product data file: BOM, artwork, warnings, photos | This is the raw material of a digital product passport. Collecting it later, model by model, costs far more |
| A written answer on who holds the technical file | Under the directive the manufacturer does; if you are importing under your own brand, the obligation may be yours |
The Role Buyers Underestimate: Importer of Record
When you import under your own brand — private label, custom box, your logo on the print — you generally become the manufacturer for compliance purposes in the EU, not merely the importer. The declaration of conformity is then yours to issue, and the technical file is yours to keep for the retention period.
This is the single most common misunderstanding we see in first orders, and it is entirely separate from the certificate question: BSCI and SEDEX audit the factory, EN 71 tests the product, and neither of them makes your declaration of conformity exist. Our certifications page sets out that distinction in more detail.
Practically: if the plan is to sell under your own brand, agree with the factory in writing, before production, that they will supply the full technical documentation package and the test reports in a form you can hold. That clause costs nothing at the quotation stage and is very expensive to negotiate after the container has sailed.
Frequently Asked Questions
Do the new EU toy rules already apply?
No. For shipments in 2026 the legal basis is still Directive 2009/48/EC: CE marking, EN 71 reports and an EU declaration of conformity. Regulation (EU) 2025/2509 replaces it from 1 August 2030, after a 54-month transition.
What is the digital product passport for toys?
A machine-readable record of a toy's compliance information — materials, safety data, traceability — accessible by scanning a code, introduced by the new regulation. It replaces the paper declaration of conformity as the main access point for authorities and buyers.
Is EN 71-1:2026 mandatory now?
Not yet. The 2026 revision was published in early 2026 but is not among the harmonised standards cited in the Official Journal — the latest update, Implementing Decision (EU) 2026/2032 of 14 September 2026, cites EN 71-15 and EN 71-16 and revises EN 71-4, but not EN 71-1:2026. Reports against EN 71-1:2014+A1:2018 remain the operative reference.
Which substances should I ask about most urgently?
PFAS and bisphenols, in that order, for any part a child can mouth or any water- and stain-resistant surface. Both sit outside what a standard heavy-metals migration test screens for, and both are targeted by the new restrictions.
Who issues the EU declaration of conformity — the factory or me?
Whoever puts the product on the EU market as its manufacturer. If you import under your own brand, that is generally you. The factory supplies the test evidence; the declaration is still your document.
Does the new regulation apply to non-electronic toys too?
Yes. The safety assessment and documentation obligations apply to every toy, electronic or not. Only the digital-risk component of the assessment is specific to connected toys.
Need the Documentation Package for an EU Order?
Kidstoy Global supplies EN 71 test reports with the standard version stated, per-model declarations and material data on request for water guns, RC toys and educational toys from our own Chenghai production. Send a model number and the destination member state.