Toy Container Loading Calculator
Pick any mix of our toy models, enter the quantity you need, and get the cartons, total CBM and gross weight — plus whether the order fits a 20GP or 40HQ, and where the container runs out first: space or weight.
Built on master carton dimensions recorded for 49 models in our own factory packing data.
Select a model to see its carton size and MOQ.
| Model | Qty | Cartons | CBM | Gross kg | |
|---|---|---|---|---|---|
| No models added yet. | |||||
| Total | 0 | 0 | 0 | 0 | |
Container plan
—
—
20GP
≈ 28 CBM · 21.8 t payload
40GP
≈ 58 CBM · 26.5 t payload
40HQ
≈ 68 CBM · 26.5 t payload
How the numbers are produced
Every model in our catalogue carries a master carton size and a pieces-per-carton figure from the factory packing list — the same numbers that go on your quotation and packing list. This tool reads those figures directly, so the CBM per carton is the real carton, not a category average:
- Cartons = quantity ÷ pieces per carton, rounded up. A partial carton still occupies a full carton position.
- CBM = length × width × height (cm) ÷ 1,000,000, multiplied by the carton count.
- Gross weight = cartons × gross weight per carton, as recorded in the packing data.
For 1 model the packing list does not carry a verified gross weight, so the weight column shows a dash instead of a guess.
Container figures are practical usable volume after stowage losses, not nominal capacity. A 20GP is treated as 28 CBM and 21.8 t; both 40-foot boxes as 58 and 68 CBM at 26.5 t. Real loading depends on how the cartons stack, whether pallets are used and how the freight is stowed — confirm the final load plan with your forwarder before booking.
Frequently Asked Questions
How do I calculate CBM from carton dimensions?
Multiply length × width × height in centimetres, then divide by 1,000,000. A carton measuring 75.5 × 43 × 64 cm is 0.2078 CBM. This calculator does that for every SKU using the master carton size recorded in our own packing data, not an industry average.
How many cartons fit in a 20GP container?
About 28 CBM of usable space after stowage losses, which is roughly 135 cartons of a 0.208 CBM toy carton. Volume is usually the limit for toys, not weight — a 20GP carries up to about 21.8 tonnes, and toy cartons rarely reach that.
Is my order better shipped as LCL or FCL?
Below roughly 15 CBM, LCL is normally cheaper once you count destination handling and the risk of co-loading damage. Above 20 CBM the freight per CBM on a full container drops sharply. Between those two numbers it depends on your forwarder and the destination port.
Why does the result say weight-limited?
It means the cargo would hit the container payload limit before it fills the volume. Toy cartons are bulky and light, so volume almost always runs out first — if weight is the binding constraint, check whether the gross weight on your quotation is per carton rather than per piece.
Are these container capacities exact?
No. The figures used here are practical usable volumes, not the nominal capacity printed on a container. Real loading depends on carton dimensions, whether they stack cleanly, palletisation and how the freight is stowed. Treat the result as a planning number and confirm the final load plan with your forwarder.
Want the cartons and weights confirmed for your order?
Send us the model mix and destination port. We will come back with the packing list, carton marks and a loading plan that your forwarder can book against.