GCC Toy Import:
G-Mark, SABER & Arabic Labels
The Gulf is not one market with one certificate. It is a Gulf-wide safety regulation, a Saudi shipment portal, and a labelling rule that most Chinese factories still get wrong — three separate things that all have to be right before the container clears.
Short answer
1. G-Mark (GC marking) — the Gulf-wide conformity mark. Toys within the GCC Technical Regulation on Children Toys must bear it before being placed on the market.
2. Saudi SABER — a PCoC per product model, and since 1 January 2025 also an SCoC per shipment. Both are mandatory.
3. Arabic — warnings and safety information must be in Arabic, and the manufacturer's declaration of conformity is bilingual, Arabic and English.
G-Mark and SABER are not alternatives to each other, and neither one is a "SASO certificate". Confusing the three is the most common reason a Gulf-bound shipment stalls at the port.
The Regulation Behind All of It
The framework is the GCC Technical Regulation on Children Toys (BD-131704-01). It is Gulf-wide rather than national, which is why the same safety file can serve several member states — while the import paperwork still runs through each country's own portal.
It is not a checklist of tests. It is a hazard-assessment obligation: the manufacturer has to evaluate the chemical, physical, mechanical, electrical, flammability, hygiene and radioactivity hazards the specific toy presents, then demonstrate that those hazards are addressed. A plastic push-along toy and a battery-powered RC car are not the same file, and the regulation does not pretend they are.
The scope also excludes things people assume are toys — public playground equipment, toy steam engines, combustion-engine toy vehicles, slings and catapults, and a range of collector items. Equally, a product marketed to children is not automatically a toy under the regulation. Classification comes first, because it decides which route you take.
G-Mark vs SABER: Different Jobs
| Aspect | G-Mark / GC marking | SABER |
|---|---|---|
| What it is | A Gulf conformity mark applied to the product | Saudi Arabia's electronic platform for product and shipment certification |
| What it proves | The toy conforms to the applicable Gulf technical regulation | That a specific product, and a specific shipment of it, has been registered and certified |
| Where it applies | Every GCC market | Saudi Arabia only |
| Who normally operates it | Manufacturer applies the marking | Importer registers; a notified body issues the certificates |
The practical consequence: your factory can ship a G-Marked product and still have the container rejected, because nobody registered the model on SABER. The mark travels on the goods; the certificates are per consignment.
PCoC and SCoC, and What Changed in 2025
Two certificates, two different time horizons:
| Certificate | Scope | Validity model |
|---|---|---|
| PCoC — Product Certificate of Conformity | One per product model | Registered against the model; reused across shipments while valid |
| SCoC — Shipment Certificate of Conformity | One per consignment | Issued for that shipment, tied to the invoice and the PCoC |
Until the end of 2024, importers could in practice clear some toy shipments on one or the other. Since 1 January 2025 both are required — and because the SCoC is tied to the commercial invoice, a buyer who splits one container across three invoices needs three SCoCs, not one.
That detail is worth raising before production, not after. It changes how the invoice is structured, and restructuring an invoice after the goods are on the water is a customs problem rather than a paperwork problem.
The Arabic Requirement Factories Skip
This is where Chinese suppliers most often ship a compliant product with non-compliant packaging. Three things are mandatory and they are not optional localisation:
- Warnings in Arabic — visible, legible and accurate, on the toy, the label, the packaging or the instructions, depending on the product.
- Instructions and safety information in Arabic — this is the importer's obligation under the regulation, which means it lands on you the moment the goods clear.
- A bilingual declaration of conformity — Arabic and English, identifying the conformity assessment procedure used.
The trap is copy-pasting one generic warning across a catalogue. The regulation is product-specific: the warning for a toy not suitable under 36 months is not the same as the one for an activity toy, a functional toy, a chemical set, or a ride-on. A generic sticker that does not correspond to the actual hazard and age grading is a defect, not a shortcut.
For retail, age and purchasing warnings must be visible before purchase — which now explicitly includes the online listing, not just the shelf.
What to Ask Your Supplier, In Order
If you are sourcing from China for the Gulf, this sequence avoids the usual rework. Each step is cheap before production and expensive after:
- Confirm it is a toy under BD-131704-01. Get the answer in writing with the intended age group.
- Get the risk assessment, not just a test report. The regulation requires hazard identification for the actual product; a lab report alone does not answer it.
- Check the test report matches the model. A report for a similar SKU in the same family is not evidence for this SKU, and it will not survive a challenge.
- Lock the Arabic artwork before the packaging run. Warnings, instructions, importer details. Reworking printed cartons is a full reprint.
- Ask for the type examination certificate date. If the product, materials or process changed, it needs reviewing; the regulation also expects review every five years.
- Confirm record retention. The technical file must be kept available for 10 years after the toy is placed on the market — which is longer than most three-year supplier relationships survive.
Where Gulf-Bound Orders Actually Fail
| Failure | Why it happens |
|---|---|
| G-Marked but not on SABER | Factory treated the mark as the whole job; no PCoC was ever registered |
| SCoC missing for a split invoice | One certificate issued for a container invoiced in three parts |
| English-only packaging | Arabic warnings added as a sticker after arrival, or not at all |
| Reused test report across models | Same mould family assumed to mean same evidence |
| Electrical or radio features overlooked | The toy regulation covers toy safety, not every requirement a powered or transmitting product must meet nationally |
| No retained technical file | Supplier changed, factory lost the file, and the 10-year clock is still running |
What This Means for Our Three Lines
RC toys. Battery-powered and radio-controlled, so the file has to address electrical safety as well as the toy hazards — and the radio link may trigger national requirements outside the toy regulation. Ask about both, not just the toy certificate. See the RC collection.
Electric water guns. Battery, LED and a water reservoir in one product. Warnings have to match how the toy is actually used, and the age grading has to be defensible — a blaster rated 6+ with small detachable parts is a problem regardless of what the box says. See the water gun collection.
Educational toys. The widest spread of risk profiles in one container: a wooden shape sorter and a talking alphabet board are the same HSN line in most markets but not the same evidence file.
If you are also shipping to Europe, the conformity logic is different again — the EU Toy Safety Regulation guide covers what applies now and what changes in 2030. The certifications page explains how product test reports and factory audits differ, which is the distinction most first-time importers blur. For duty and classification, start with the toy HS codes guide.
Frequently Asked Questions
Is G-Mark the same as a SASO certificate?
No. G-Mark is the Gulf-wide conformity mark on the product. A "SASO certificate" is not a single document: in Saudi Arabia the relevant process runs through SABER, which issues a PCoC per product model and an SCoC per shipment.
Do I need both PCoC and SCoC?
Yes. Since 1 January 2025 both are mandatory for shipments to Saudi Arabia. The PCoC covers the product model; the SCoC covers the specific consignment and is tied to the invoice.
Which regulation governs toys in the Gulf?
The GCC Technical Regulation on Children Toys, BD-131704-01. It sets the safety and conformity requirements Gulf-wide; individual member states run their own import portals on top of it.
Must the packaging be in Arabic?
Yes. Warnings must be in Arabic, and instructions and safety information must be supplied in Arabic. The declaration of conformity is prepared in Arabic and English.
How long must compliance documents be kept?
Ten years after the toy is placed on the market. Build that into the supplier relationship — if the factory disappears in year three, you are the one holding an incomplete file for seven more.
Can one test report cover several models?
Not automatically. Evidence has to correspond to the actual product, its materials and applicable requirements. Changes to materials, components or process can invalidate it, and the type examination certificate should be reviewed when that happens, and in any case every five years.
Shipping to the Gulf?
Kidstoy Global supplies electric water guns, RC toys and educational toys from our own Chenghai production. Send the destination port and the models you are considering, and we will confirm per-model MOQ, carton data and the compliance documents we can provide before the packaging run.