Toy Import Payment Terms:
T/T, L/C and FOB vs CIF vs DDP
Two questions decide whether a toy order is safe: when does your money leave, and where does your responsibility begin. Both are settled in one document — the proforma invoice — and both are worth understanding before you sign it.
Short answer
Most toy orders from China settle on 30% T/T deposit with 70% against a scanned bill of lading, and ship FOB. Those two defaults exist for one reason: they move risk at the exact moment each side can still verify what it is getting. The deposit is released when you can see the goods were made; the balance is released when you can see they were loaded.
Anything that shifts both decisions to the same moment — all the money up front, or all of it at the destination — makes one side carry the entire bet. That is what you are actually negotiating.
The Four Payment Structures You Will Be Offered
Suppliers rarely explain the menu, they just quote one line in the proforma invoice. Here is the whole menu, with the risk position stated plainly.
| Structure | Who carries the risk | When it is reasonable |
|---|---|---|
| 100% T/T in advance | You, entirely | Sample charges and orders small enough that losing them would not change your quarter. Never the default for a first container. |
| 30/70 T/T — deposit, then balance before shipment | Shared, balanced toward the supplier | The standard wholesale structure. The deposit funds materials; the balance clears before the goods leave. |
| Deposit, balance against B/L copy | Shared, shifted toward you | Repeat orders where you have a track record. You pay after you can read the bill of lading, but before the original documents are released. |
| L/C at sight | Neither — the banks hold it | Order values large enough that the bank fees and paperwork are a rounding error. Both sides must be able to produce compliant documents exactly. |
| Escrow / platform protection | The platform, temporarily | When you transact through a marketplace that holds funds. Note the platform decides disputes on its own evidence rules, not customs law. |
Two practical notes. First, the deposit percentage is a negotiation, and it is negotiable on both sides: a factory quoting a low MOQ often wants a higher deposit because the material buy-in is proportionally heavier. Second, the balance trigger matters more than the split. "Before shipment" and "against B/L copy" can be a week apart in practice, and that week is the entire value of the clause.
Our own published terms sit at the conservative end of this table — prices quoted EXW/FOB, orders confirmed on receipt of a deposit, final balance before shipment. They are listed on the policies page rather than buried in a quotation, so you can compare them against any other supplier's before you start talking numbers.
What the Deposit Actually Buys
Buyers often read a deposit as a trust payment. Operationally it is a materials payment. Injection-moulded toys are material-heavy — resin, colourant, electronics, battery cells and packaging all have to be bought before a single unit is moulded, and Chinese material suppliers mostly work cash-on-delivery. A deposit is what converts your order from a quotation into a purchase order inside the factory.
That is also why the deposit conversation changes with order size. On a 60-piece trial order the material bill is trivial and the factory's real cost is the machine setup, so a rigid 30% is not always the shape of the deal. On a container load, 30% of the order value genuinely tracks the material exposure — which is why the number has survived so long across the industry.
Incoterms: The Four That Appear on Toy Orders
Incoterms 2020 defines eleven terms. In toy wholesale, four of them do almost all the work. The column that matters most is not "who pays" but "where risk passes" — those are different answers, and confusing them is the single most expensive mistake in this whole article.
| Term | Supplier pays | You pay | Risk passes to you |
|---|---|---|---|
| EXW Chenghai | Packing only | Trucking, export clearance, everything downstream | At the factory door |
| FOB Shantou / Shenzhen | Inland haul, export customs, loading on board | Ocean freight, insurance, import duty, inland delivery | When the goods are on board |
| CIF destination port | FOB costs plus ocean freight and marine insurance | Import clearance, duty, port charges, inland delivery | Still when loaded on board |
| DDP your door | Everything, including your country's duty and taxes | Nothing at the point of delivery | At your delivery address |
The CIF trap
Under CIF the supplier pays the freight, so it feels like their responsibility until the goods reach your port. It is not. Risk transfers at the origin port the moment the cargo is loaded — the same point as FOB. If the vessel sinks mid-Pacific, a CIF buyer whose insurance was arranged by the supplier is the one who discovers whose name is actually on the policy. Read the insurance certificate, not the invoice line.
The EXW problem
EXW looks like the cleanest option because the price is the lowest. But under EXW you become the exporter of record in China, and a foreign buyer generally cannot complete Chinese export clearance or claim the export VAT treatment on their own. In practice most EXW quotations from Chenghai are converted to FOB the moment someone checks who is filing the export declaration. If a supplier offers EXW cheerfully, ask who handles the export paperwork.
When DDP is genuinely correct
DDP is the right answer when you are not the importer in any meaningful sense — for example stock moving directly to a fulfilment warehouse, where you want one landed number and no customs relationship. The price is higher because the supplier is absorbing duty, and the supplier is pricing that duty off their own assumption about your product classification. Which is why the classification work matters: a DDP price built on the wrong HS code is a price that gets renegotiated after the fact. Our toy HS code guide covers that side, with product-level notes for water guns and RC toys.
Why FOB Is the Default for Toy Containers
Three reasons, and only the first is about money.
One: it separates two prices that behave differently. The factory controls the goods cost; the market controls the freight. Bundling them into a CIF or DDP number hides which one moved, so you cannot tell whether a price increase next quarter is resin or container rates.
Two: you keep your own forwarder. Your forwarder knows your bonded warehouse, your broker and your delivery windows. A supplier's forwarder knows the supplier's.
Three: the bill of lading stays in your control. Under FOB, the B/L is issued to your consignee details. That document is the leverage in "balance against B/L copy" — and it is worth being explicit that a scanned copy is not the original. A supplier who has already been paid in full has no reason to rush the telex release, so keep the final payment tied to a document you can verify: the B/L number, the vessel, the container count and the on-board date.
The Documents to Collect Before the Balance Leaves
A balance paid against a photograph of cartons is a balance paid on trust. Paid against this set, it is paid on evidence:
- Signed proforma invoice — with the company chop, the payment split, the Incoterm and a stated validity date. If the price is "subject to raw material costs" with no validity window, the number is not a price yet.
- Commercial invoice and packing list — carton count, outer box dimensions, gross and net weight per carton. These are the numbers your broker needs and the numbers you can check against the loading photos.
- Bill of lading — check vessel name, on-board date, container and seal numbers, and that the consignee block matches your company exactly.
- Certificate of origin — a non-preferential CO by default, or the preferential form for your trade bloc (Form E for ASEAN, Form AJ for Japan). Ask which one applies to you; it changes the duty you pay, not the price you paid.
- Test reports for the specific model — EN71 or ASTM F963 as applicable, dated within the last year and naming the model. A report for a sibling model is a report for a different product.
- Loading photos with the container number visible — the cheapest insurance against short shipment you will ever get for free.
The certification side has its own logic, which we cover separately on the certifications page — factory audits and product test reports prove different things, and buyers regularly treat one as the other.
Six Red Flags in a Payment Request
None of these is illegal on its own. Together with a first order, each one is a reason to slow down.
- 100% advance on a first order. The request itself tells you the supplier is financing production with customer money, which means your order is competing with the next customer's for the same cash.
- Payment to a personal account. The account name on the invoice should match the company on the business licence. A personal account removes your ability to dispute anything.
- Bank details that change mid-order by email. This is the most common fraud in Chinese trade, and it arrives as a perfect-looking email from a slightly wrong domain. Confirm any change by a second channel, every time.
- No company chop on the proforma invoice. A PI is a one-page contract. Unchopped, it is a suggestion.
- A price far below every other quotation on the same model. In toys, that usually means a thinner wall, a smaller battery, or a different plastic grade — visible in your hand, invisible in a photo.
- Refusal to name a production window in writing. If the deposit is due now but the delivery date is verbal, only one of those is enforceable.
A First Order, End to End
Planning ranges for an existing mould — the situation where you are buying a catalogue model rather than commissioning new tooling. Treat them as a schedule to check a supplier's answer against, not as a promise from this page.
| Stage | Typical duration | What moves |
|---|---|---|
| Inquiry to quotation | 1–3 working days | Model number and target quantity sent; EXW/FOB price returned |
| Sample | 5–10 days plus courier | Sample fee and freight paid by buyer; opened to confirm battery, finish and packaging |
| Proforma invoice and deposit | 1–2 days | PI chopped and signed; deposit released to the company account |
| Production | 20–35 days | Materials purchased, moulding, assembly, packing. New tooling adds its own lead time on top. |
| Inspection and balance | 2–5 days | Pre-shipment check, then balance released against B/L copy |
| Ocean transit | 25–40 days to US/EU ports | Telex release or original B/L couriered before arrival |
If your shelf date is fixed — a holiday season, a trade show, a marketplace launch — work backwards from the sailing date and add a margin for the inspection stage, because that is where first orders lose their week. Our Christmas ordering timeline does that arithmetic for Q4, and the Chenghai sourcing guide covers what to verify on the shop floor before any of it starts.
What These Terms Look Like on a Real Order
Three catalogue models across our lines, at their standard MOQ, priced FOB — the structure most buyers end up using for a first container:
Frequently Asked Questions
What payment terms are standard for toy orders from China?
30% T/T deposit with the 70% balance before shipment, or against a scanned bill of lading on repeat orders. Larger orders may move to an L/C at sight, but that adds bank fees and a document-checking stage that punishes any typo.
Is FOB or CIF better for toy imports?
FOB for almost every case. It keeps the freight price visible and separate, lets you use your own forwarder, and keeps the bill of lading in your hands. CIF only makes sense when you genuinely cannot arrange freight — and even then, risk still transfers at the origin port.
When exactly do I pay the balance?
Either before shipment or against a B/L copy — the two are different clauses and you should know which one your PI says. The second gives you documentary evidence that the goods were actually loaded before the remaining money leaves.
Can I pay a Chinese toy factory by credit card?
Sometimes through marketplace checkout, rarely on a direct factory order. Card fees and chargeback exposure are why factories prefer bank transfer. If card payment is essential for your cash flow, ask before the PI is issued rather than after.
What should a proforma invoice contain?
Model and quantity, unit price at the agreed Incoterm, total value, deposit and balance split, production lead time, shipping port, payment account matching the company name, price validity, and the company chop. Anything missing from that list is something you will be arguing about later.
Is the deposit refundable if production fails?
Only if the PI says so. A standard PI makes the deposit non-refundable once materials are purchased, because the factory has already spent it. If you need a refund clause, negotiate it into the PI before paying, not after a delay.
Need the Terms Before the Price?
Kidstoy Global quotes EXW/FOB with a chopped proforma invoice, 30% deposit and balance before shipment, on water guns, RC toys and educational toys from our own Chenghai production. Ask for the terms in writing alongside any quotation.